FMR Audio RNC1773 Really Nice Compressor Stereo Microphone Limiter 2-Channel Mic Comp Module Unit

FMR Audio RNC1773 Really Nice Compressor Stereo Microphone Limiter 2-Channel Mic Comp Module Unit

Category

Share this:

The RNC1773 Really Nice Compressor from FMR Audio is a stereo compressor in a 1/3 rack size which offers a high-fidelity audio path and versatile compression schemes to help you control the level of vocals or create dynamic special effects for percussive instruments.

The RNC1773 provides two modes of operation, controlled with five parameters. The Normal mode lets you set the compression’s attack and release times to achieve snappy snares and popping basses. The Super Nice mode cascades three stereo compressors in series, reducing compression artifacts and producing nearly invisible compression for natural-sounding vocals, acoustic guitars, program bus, and more.

The Really Nice Compressor employs a microprocessor to replace sidechain analog components, which can cause scratchy pot and switch problems. No audio flows through the microprocessor or front-panel controls, giving you the accuracy and precision of digital control with the clean tonal character of an all-analog signal path. The unit comes with a sidechain input to make your sounds cut through the mix.

Stereo compressor in 1/3 rack size, with high-fidelity audio path and compression scheme
Normal mode for serious signal squashing—very fast attack times allow positive control of percussive sources
Super Nice mode for near-invisible compression—cascades three stereo compressors in series to reduce compression artifacts
5 parameter controls with attack and release
Digital controls—no audio flows through front panel controls, permitting short audio runs to avoid hum/noise pickup and accurate repeatability of your favorite settings
Single 1/4″ TRS cable attachment to insert jacks
1/4″ TRS sidechain insert for special effects
Rugged, extruded aluminum and electro-galvanized steel enclosure
Rack-mountable design

Power supply not included

Size
1/3 x 1 RU
Connectors
1/4″ Unbalanced Input (TS, or TRS for Console Inserts)
L/R In and Out, TRS Sidechain Access
Controls and Displays
Rotary: Threshold, Ratio, Attack, Release, Output Trim
Switches: Bypass, Mode Select
Meter: 8-Segment LED Gain Reduction, 0 to 20 dB
Operating Modes
Normal, Super Nice
Impedance
Input: 10 kOhms, Single-Ended
Output: 100 Ohms, Single-Ended
Operating Level
0.775 Vrms (0 dBu) Nominal
Noise Floor
<-90 dBu, over 20 Hz to 20 kHz
Frequency Response
10 Hz to 100 kHz ± 0.5 dB at 0 dBu, No Gain Reduction
Clip Point
+22.5 dBu at 3% THD, 1 kHz, >2 kOhms Output Load
THD+N
<0.1%, No Gain Reduction at 1 kHz, 0 dBu
<0.5%, 6 dB Gain Reduction at 1 kHz, 6:1, 6 ms Attack, 0.5 sec Release, 0 dB Gain
Threshold Range
-40 dBu to +20 dBu
Ratio Range
1:1 to 25:1
Attack Range
0.250 µs to 200 ms, +40 µs, for 63% correction with 15 dB over threshold input signal
Release Range
0.2 ms to 200 ms for 100% recovery after 15 dB gain reduction
Output Trim Range
±15 dB
Power Supply
100-240 VAC, 47/63 Hz
12 VDC, 500 mA regulated, 2.1 mm barrel connector
Dimensions
5.5 x 5.5 x 1.6″ / 13.9 x 13.9 x 4.0 cm
Weight
2.0 lb / 0.9 kg

If you have something like this, and you’re interested in finding out more or potentially selling yours, please click here.